Page 1 of 1
Magneto
Posted: Thu Jul 08, 2004 9:28 am
by Ken (48 Cub)
Where can I get my magneto rebuilt? I thought that there was a link or two on this board but I can't find them.
Thanks.
Posted: Thu Jul 08, 2004 9:53 am
by Bigdog
Ken, -
http://www.magnetoparts.com is a possible source. Also, Weaver's Magneto Repair in Shiloh, Ohio. 888 624-7732 offers parts and service.
Posted: Thu Jul 08, 2004 9:54 am
by Donny M
Hey Ken,
Just ask Rudi
If you're not in a hurry maybe I could do it for you. Do you have the parts? What parts need to be replaced?
It's not too hard to do it yourself. Check this out:
http://www.cleancomputes.com/Cub/Maintenance%20Tips%20and%20Techniques/Magneto%20Clean/Magneto%20Clean.htm
Posted: Sat Jul 10, 2004 12:41 pm
by Rudi
Ken:
If you have the time send it to Donny! WOW
Couldn't have been better ifn it just came off the assembly line! Beautiful job
It does pay to take your time and do it right.
Oh, btw Donny, got a chum in the fastner business checking for them thar screws!!!!!!
Boy it is good to be back!
Posted: Sat Jul 10, 2004 2:43 pm
by Cub-Bud
Here is a link to look at:
http://www.magneeders.com/
I have never had him do any work for me, nor do I know anything about him. I have seen his ad in Red Power Magazine.
Posted: Sun Jul 11, 2004 12:17 am
by Donny M
Posted: Sun Jul 11, 2004 12:39 pm
by Rudi
Donny:
Wouldn't worry about it too much, Ellie talks to me all the time
Posted: Sun Jul 11, 2004 2:44 pm
by johnbron
Posted: Sun Jul 11, 2004 4:18 pm
by John *.?-!.* cub owner
MIne keeps giving me smart aleck answere!
Posted: Sun Jul 11, 2004 4:56 pm
by Rudi
Posted: Sun Jul 11, 2004 6:06 pm
by Donny M
Posted: Mon Jul 12, 2004 10:43 am
by Ken (48 Cub)
OKAY Donny, with your great article in hand I am in the process of rebuilding the mag. I have the parts on order. I need to fill a chip in the top of the housing where the cap sits. I am going to use JB Weld for that.
Thanks,
Posted: Mon Jul 12, 2004 11:47 am
by Donny M
Posted: Mon Jul 12, 2004 9:43 pm
by parts man
THe pony we had, had the heaves, so we had to put it down!