Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
12 posts • Page 1 of 1
The alternator belt on my '48 cub broke and I want to replace it but I have two questions:
Can I find this belt at my auto or farm supply store?
Do I have to remove the radiator in order to take out the fan in order to get the new belt on? (or maybe a better question would be: What are the proper steps to replace this belt?)
Any/all help would be greatly appreciated.
yes on alternator belt at autoparts or NAPA
No you dont have to remove the radiator
Remove the fan shroud and fan blade assy should do it.
the manual link at the top of the page will give you directions
Remember :::::DO not try to turn the hex nut that holds the fan assembly on. If you do you
will break the mounting bracket. The mounting bracket has raised sides that hold the nut to
keep it from turning. You place a wrench on flat area of the shaft on the other side of the mounting bracket to turn the entire fan assembly and the nut stays still in its position between the sides of the mounting bracket.
Thanks for the responses guys--I got the belt this afternoon and will tackle the cub work later today. I did look over the manuals and found some other maintenance I can do while I have everything apart.
Seems unavoidable that I have to remove the fan to replace my alternator belt (very small and won't snake around fan) but I can find nothing in the manual or the archives. Can someone point me in the right direction?
Do you have an alternator or a generator? In either case this should help:
GSS-1012 Electrical Equipment
See if this helps. You need to go around one fan blade at a time. Not sure about alternator belts.
It has an alternator. I wound up taking the fan off seeing that the belt was so small. it would have never come off trying to snake it around the blades. Some mild to moderate profanity, a little bit of blood and sweat and I got her done.
Now another question. I put the new alternator and the belt on it and it starts just fine but I noticed when I pull the ignition switch with the tractor NOT running the ammeter shows it is charging. Once the tractor is running the ammeter goes to neutral.
A wire on backwards somewhere? Thanks for all of the help, I'm getting there.
Sounds like the wires are backward on the ammeter.
If it starts at 0 with the switch off, then moves to slight charge with the switch on, then it is backwards on the ammeter.
If things are working normally the ammeter should show a slight charge when the tractor is running.
The "chain link" belts from woodworking suppliers are a blessing ! Have one on my "B" alternator and has been running for over 5 years! They can be made up to any length you want - not cheap but handy! No worries mate!! Dusty B
Grandpa's '41 B
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
12 posts • Page 1 of 1
Who is online
Users browsing this forum: GenrlCub and 4 guests