This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
alternate drawbar
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
bjgravley
- 10+ Years
- Posts: 131
- Joined: Wed Nov 26, 2003 9:47 pm
- Location: Surry,VA
alternate drawbar
i think i have come across a alternate drawbar it is 1/2" thick 29" long and 2" wide with a u shape scalped out hole for the head of the bolt to fit in just like the rear drawbar three holes in the middle approx, 5/8"it is turned 90 degrees at both ends then goes over 6" and turns down flat for 12" thats where the 3 -5/8 holes are what do you guys think is this a alternate drawbar?
-
John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Your description sounds more like the anchor bracket for a swinging drawbar. Go to this link and see if it's what you have
http://www.tm-tractor.com/gdr/swngbar_001.htm
http://www.tm-tractor.com/gdr/swngbar_001.htm
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
Jim Becker
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
That sounds a little like one but a picture would help a lot.
I think Rudi has a copy of my drawing with dimensions on his site.
TM Tractors has them pictured on their site too. This page is the Cub-54A version.
http://www.tm-tractor.com/gdr/subdrbar1_001.htm
Another page has the Cub-54 version, where this picture came from.
I think Rudi has a copy of my drawing with dimensions on his site.
TM Tractors has them pictured on their site too. This page is the Cub-54A version.
http://www.tm-tractor.com/gdr/subdrbar1_001.htm
Another page has the Cub-54 version, where this picture came from.
Who is online
Users browsing this forum: Dale Finch and 38 guests
