alternate drawbar

Thu Jul 15, 2004 8:36 pm

thanks for the info on what i have it is the swinging drawbar, now what is the swinging drawbar used for? :?:

Thu Jul 15, 2004 9:07 pm

The swinging drawbar was used when pulling implements such as land drags, harrows, disks etc. It allowed you to make shorter turns.

rod

Sat Jul 17, 2004 8:39 pm

whAT ABOUT A ROUND ROD THREE QUARTER IN DIA. WITH A 90 DEGREE TURN AT BOTH ENDS GOING DIFFRENT WAYS?

Sat Jul 17, 2004 9:32 pm

HOw long? If it's aobut 3 1/2 feet long it could be the rod for the rear rockshaft. Shorter it might be a lift rod for an earlier blade. Go to http://www.tmtractor.com and look at their illustrations.

rod length

Sun Jul 18, 2004 6:02 pm

it's 49" long on one 90 degree turn it has a sholder on it

Sun Jul 18, 2004 7:37 pm

The rod for the rear rockshaft is 48" center to center, 49" overall. That is what you have.