Farmall Cub

I know there's been threads on this, and POR15 comes to mind, but there were a couple of other gas tank sealer products guys have had success with that might be locally available to me.

I have a pony motor tank for a Cat Grader that needs treatment bad. and my Dad has the gas tank out of the Gerlinger fork lift, same problem.

any other products we can use?
thanks, Art

There is one called KREEM. You can get it at a motorcycle shop.

I have used Line-A-Tank sold by NAPA. It looks like it is made by Federal Metals, Inc. 1-800-880-4461. I have had it in 2 tractors for about 1 1/2 years and no more rust problems.Good luck on your project.

Robert
Alabamacub

I just recently had my tank done with a product called (Red-Kote) but I think the only place to get it is at radiator shops that repair gas-tanks. The shop that did my tank offered to sell me some for personal use but I had him do the tank instead.

POR-15 is the one that I have used with great success. You can contact at
http://www.POR-15.com. They also have high-temp paint for the manifold and
also other types of paint to use on rusty metals.

Hope this helps.