Front main seal on a '49

Sat Jul 31, 2004 5:19 pm

Any tricks to pulling the main seal ?? and replacing also any one have advice where to find pics on how the buzz saw mounts on the back TM doesn't have pics for that yet

Sat Jul 31, 2004 5:51 pm

When you pull the fan pulley, it comes off hard. use a bearing separator or some sort of backing behind the flanges. If you pull on the flanges, they will break. Some heat applied will help here.

Here is a picture of the buzz saw mounted. Maybe it will help.

Image

By the way, welcome to the board.