This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
rebuilding sickle
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 97
- Joined: Mon Jul 26, 2004 5:59 pm
- Location: Salem CT
- Contact:
rebuilding sickle
I have a missing ledger plate on my sickle bar mower. Does anyone know if they are available and if so what is the part #. I also have a couple of bent up guards if anyone knows their part # Thanks for help,any advice on replacing these would be appreciated. Bob Roraback
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
Hi Bob,
The ledger plates, knives, guards, and rivets are all available at the
IH dealer. Some other outlets such as TSC and AG stores. It would be
best to take the old parts with you because some of the dimensions
get a little critical.
I recently purchased a complete set of knives for the sickle bar
and new ledger plates and some guards.
Hope this helps. Enjoy your mower.
The ledger plates, knives, guards, and rivets are all available at the
IH dealer. Some other outlets such as TSC and AG stores. It would be
best to take the old parts with you because some of the dimensions
get a little critical.
I recently purchased a complete set of knives for the sickle bar
and new ledger plates and some guards.
Hope this helps. Enjoy your mower.
Who is online
Users browsing this forum: Glen and 23 guests