Page 1 of 1
PTO Fluid Leak?
Posted: Tue Aug 17, 2004 10:09 am
by mxhene
my PTO is leaking its hy-tran fluid, looks like around the shaft itself. I assume there is a seal there, is it difficult to replace? Will I need special tools, and where can I get a new seal?
Posted: Tue Aug 17, 2004 10:33 am
by Donny M
It's pretty straight forward to change.
CR#11223 available at NAPA.
Posted: Tue Aug 17, 2004 1:23 pm
by John *.?-!.* cub owner
mx, also make sure your transmission isn't over filled. There is a level plug on the left side aobut even with the gear shift and down low.
Posted: Sun Sep 12, 2004 6:52 am
by mymariah
I have a 48 cub - can anyone confirm the CR seal number above? We took the seal out, and it has no numbers on it.
Posted: Sun Sep 12, 2004 7:44 am
by johnbron
FROM ATIS BOARD
***********
Seal, PTO Shaft
I-H =126107C1
351271R91
CR = 11223
Federal Mogul = 470712
National = 470712