Farmall Cub

I have a single point fast hitch on the cub, can I make, or purchase a rig that would allow me to use 3 point impliments without removing the fast hitch. I would like something that would go on and off using the single point fast hitch as its mounting for the 3 point impliments

Thanks
Rick

GREAT IDEA Ricaroo

I think whatever you find you will still need to add on the fast hitch point to it.
I remember reading here that these were available, but I could not find one.
Depending on how many 3 pt. tools you are lookin at, it might be easier to modify the tool with the fast hitch point.

It was faster and cheaper to buy the 3 point tool cut off the 3 point stuff and weld on the one point prong.

the 3 point adapters stick out from the hitch and then you ad the tool length out the back of the hitch and now you have way more weight out the rear then you want. It will tend to make the front end light.

you can buy 1-point prongs off the internet or start searching around scrap yards and you can do what I did and made some from a super C work on my cub cost me $10 for 2 prongs.

check ebay for the 3 point adapter or you could sell your fast hitch and buy a 3 point hitch kit.
Chad