Cub Crank Update

Thu Aug 26, 2004 10:07 am

Sent e-mail message


Here is the e-mail I sent to maker of cranks and replies in reverse order.




Subject:Re: HAND CRANK PIN

Hi Andy, I am glad I brought it to your attention as I had never even thought of that until I read it on the Cub Forum.
I am in no hurry for my crank so I will wait for you to send me your corrected version. Please e-mail me when you ship it.

Thanks again<>Bronson


From:    "andrew hansen" <amsteelandfab@earthlink.net>

To:"Bronson"<bronson@webtv.net> Subject:Re: HAND CRANK PIN
Date Thu, Aug 26, 2004, 9:08am

Thank you for letting me know. I have been selling these for quite some time with no complaints. The correction is being made. If you want to wait for a crank with the proper pin location it will take a couple weeks. Again I appreciate the information.
Advise
Andy ( fastenerspecialist )
amsteelandfab@earthlink.net
1-800-377-9088


----- Original Message -----
From: Bronson <bronson@webtv.net>
To: andrew hansen <amsteelandfab@earthlink.net>
Sent: Wednesday, August 25, 2004 9:33 PM
Subject: HAND CRANK PIN

Hi Andrew, I was reading this thread on the farmall Cub forum and they seem to think that your crank pin is positioned wrong for starting on the compression stroke. I thought that I would send it for you to read and see what you think of some senior members views on this possible problem.

http://farmallcub.com/phpBB2/viewtopic.php?p=26802


Thanks<>Bronson