depth adjuster question

Wed Sep 01, 2004 2:10 pm

can anyone tell me how to set up the depth adjuster for a one bottom plow? any help would be appreciated
Jim

Wed Sep 01, 2004 2:13 pm

Jim, it will vary with soil conditions, but if your plow is going too deep, pull the lever back to raise the front. If the plow will not sink into the ground, lower the front by pushing the lever forward so the point can penetrate.

Wed Sep 01, 2004 5:48 pm

If your question is how to mount the lever, look at these pictures.
http://www.tm-tractor.com/gim/193_plow_001.htm