This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Starter question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- WJ
- 10+ Years
- Posts: 382
- Joined: Sun Jun 13, 2004 10:18 am
- Location: Weatherford, Ok
- Contact:
Starter question
Is the starter supposed to be painted black or red??? I like either way, but I want to be correct.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
From the factory, it would have been red. If added later, or replaced from a supplier, it would likely have been black.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- WJ
- 10+ Years
- Posts: 382
- Joined: Sun Jun 13, 2004 10:18 am
- Location: Weatherford, Ok
- Contact:
- WJ
- 10+ Years
- Posts: 382
- Joined: Sun Jun 13, 2004 10:18 am
- Location: Weatherford, Ok
- Contact:
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
l0 wrote:Is their someone that reproduces the delco badge on the starter??
I have never seen any Delco badge replacements but a starter/generator repair shop could probably give you that answer. I was going to remove the badge on mine for painting but could not remove the rivets so I carefully masked it with tape.
Then came Bronson
Who is online
Users browsing this forum: Gary Dotson, Majestic-12 [Bot] and 21 guests