Grader blade

Thu Sep 09, 2004 6:06 am

Would this be a good choice for fabricating my own rear grader blade?
I have a 52 cub. I just cant seem to find a reasonably priced blade locally and anything that has to be shipped is too expensive. ... =200150124

Fabrication and welding is not a problem, I thought that I would adapt this to the drawbar off of the rear. Any suggestions on mounting would be appreciated. Thanks guys, Bob Roraback

Thu Sep 09, 2004 10:41 am

bob: locally, you could check with Ray Currier in Old Lyme Currier Antique Tractors @ 434-5590 or 908-7156 for a cub 51a blade. he probably has one.

that blade can be mounted in either the snow plow configuration or center mounted grader blade.

your close by me, check out

our fall show and auction is Oct 2 and 3

Thu Sep 09, 2004 11:36 am

Thanks Art, I plan to attend the show at Zagray. Thanks for the phone # , I called and he is out of town but will return Sat. I will let you know how I make out. Bob