A word of caution should be noted:
"Do not over-torque the three rear bolts......These three bolts attach into the rear seal housing which is made of aluminum and can be stripped out very easily."
Those who fail to learn from mistakes are doom to repeat them.
Make sure both surfaces are clean and dry before applying the cork gasket and no sealant is required.
NJ Farmer
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Replacing an Oilpan Gasket
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
NJ Farmer
- 10+ Years
- Posts: 354
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
