Sat Sep 18, 2004 8:58 am
My brother and I are working on one of the cubs and we filled the oil as it says. But, the oil seems to run out the back of the fan assembly next to the engine. Is the normal the book doesn't show anything in there to stop it from running out ???
Sat Sep 18, 2004 9:15 am
Did you rotate the fill hole to the 6 o'clock position with the screw out so that it can properly drain to the desired level? There is a little stand pipe in there that drains the excess oil out. An over filled hub will leak oil out the back.
Sat Sep 18, 2004 9:18 am
[ Are we talking hub oil or engine oil? ]
Sat Sep 18, 2004 12:32 pm
yes will turned it like it said and drained it but at the same time it runs out the back of the shaft next to the engine.. it looks like there should be some type of seal at the back of hub assembly...but the service book doesn't show it..
Sat Sep 18, 2004 1:24 pm
Parts Manual TC-37F, Group 12, Page 5 shows a better explosion of the assembly than my service manual.
Does this help?
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.