55 lo boy

Tue Sep 21, 2004 12:48 pm

After mounting the blade on the front of my Loboy the Hydraulics are real jerky on the touch control, is this because it needs the fluid changed?
Also on these lo boys is it possible to mount the blade under the body or just in front?
This is a great website by the way, real informitive.

Tue Sep 21, 2004 1:28 pm

The blade will not mid-mount on a lo-boy, There is not enough room for lift. There may be some air in the hydraulics.

Check out the touch control manual at this link:
http://www.cleancomputes.com/Cub/Blue%20Ribbon%20Service%20Manuals/GSS-1024%20Touch%20Control/index.html

Read the troubleshooting section for a description that best suits what you see on your tractor.