Farmall Cub

Posted: **Mon Oct 04, 2004 3:24 pm**

Any Ideas on replacement voltage regulators??

I found that when I ground the field on my gen, it will show a charge on the amp meter.
So, I assume that the regulator is bad.
I have check to be sure that the regulator in grounded.

I went to NAPA to get a replacement and they would have to order it,
the bad part is they want $56.41 for it.

Is this a little on the high side??

Also, my work light is a #4511 sealed beam, they want $37.00 for it.

Wow, I know I will be able to beat the price on the light bulb.

Any thoughts on the price of the regulator would be appreciated!!

Ron

Posted: **Mon Oct 04, 2004 4:32 pm**

Take the top off the regulator and touch up the contact points a little before you get that expensive. Might try http://www.cngco.com or http://www.casetractorparts.com

Posted: **Mon Oct 04, 2004 6:56 pm**

Thanks John for the reply.

I did try to dress the points a little, then tried it again.

No help!!

I did see a regulator in my Valu-built catalog that I forgot I had.
Their price is $30.89, a good bit better than NAPA.

Ron