I installed a grader blade on the front of my 1957 lo-boy.
I bolted the blade to the front of the tractor using the original manual for the blade.
The whole job went together very well.
My tractor has hydraulic tough control
The problem I am having is that the hydraulics does not throw the arm of the blade enough to raise the blade.
On the hydraulic rockshaft, the L shaped lifting lever does not go forward enough.
The lifting lever moves form 10 o’clock to 2 o’clock.
Is there any way to adjust the rockshaft to throw the lifting lever more to the front of the tractor?
Or did I screw something up. The install looks the same in the book as it does on the tractor.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Leveling and grader blade
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- spaceghost
- 10+ Years
- Posts: 756
- Joined: Wed Jun 23, 2004 8:19 am
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A - Location: Middleboro MA usa
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Which end of the L shaped bracket on the touch control rockshaft did you attach the lift arm to? I use a lo-boy blade on a standard cub and I had to attach the lift arm to the opposite end of the bracket to get enough lift.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: Eugene and 42 guests