snowblade

Wed Oct 06, 2004 8:38 pm

I'm looking for help. I recently bought my first Cub, and we tried to mount the front snow blade this evening. We figured out the 2 solid mounts, but can't figure out how the hydraulic lift is attached. I don't know if something is missing, or if we are just not looking at something correctly. I'd sure appreciate any help I could get. Thanks Ed

Wed Oct 06, 2004 8:45 pm

Ed, check out the manuals on Rudi's site.

http://www.cleancomputes.com/Cub/Cub%20Implement%20Manuals/Cub-Grader%20Blade/index.html

Wed Oct 06, 2004 8:47 pm

Ed:

First, let me say welcome to the Greatest Forum on the Net and to the Cub Family :!: :D

Second, might I suggest that you read New Members and Visitors, Please READ. The Cub FAQ's are filled with a lot of really good general knowledge and the Cub Info has some good trouble shooting tips. The Best of H.L. Chauvin puts a humourous yet very helpful tone to fixing your Cub. Also, the Cub Manual Server has lots of info to assist you as well.

The manuals that you would be looking for are one of the two listed here:
McCormick Deering Leveling and Grader Blade, or Cub-54A and L54 Grader Blade.

Hope that this helps somewhat.

Thirdly, might I again suggest, that you visit Binder Books, and order these manuals:
Owner's Manual
TC-37F Parts Manual
GSS-1411 Service Manual.

These three manuals will be the best investment that you can make as a new Cub owner.

Again, Welcome to the Cub Family :D