Cub-193 Moldboard Plow question

Tue Oct 12, 2004 8:41 pm

The "depth adjusting link" has an eye bolt at the bottom. The top of the link fits into the bail bracket, the bottom into the tow bar. My question is-what hole ( numbered from the left ) does the eye bolt of the link go into on the tow bar. Remembering the plow hitch bolts in the 2nd and 4th holes . Thanks!

Tue Oct 12, 2004 8:51 pm

The one on the side.

Image

Bigdog -----

Tue Oct 12, 2004 9:18 pm

You are absolutly right , when it is used with the manually operated system -- but when you use the touch ,power control , "is it the same hole" ? It doesn't line up with the bail bracket .

Tue Oct 12, 2004 9:40 pm

Touch-Control or hand lift doesn't matter. All of the drawbar, depth control and beam mounting is identical either way.

Tue Oct 12, 2004 10:07 pm

I have one cub with touch control and one without, and the hook up is the same on both. Is it possible you have a homemade depth control lever (they are not unusual) or a different drawbar.