Page 1 of 1

Cub-193 Moldboard Plow question

Posted: Tue Oct 12, 2004 8:41 pm
by countershaft
The "depth adjusting link" has an eye bolt at the bottom. The top of the link fits into the bail bracket, the bottom into the tow bar. My question is-what hole ( numbered from the left ) does the eye bolt of the link go into on the tow bar. Remembering the plow hitch bolts in the 2nd and 4th holes . Thanks!

Posted: Tue Oct 12, 2004 8:51 pm
by Bigdog
The one on the side.

Image

Bigdog -----

Posted: Tue Oct 12, 2004 9:18 pm
by countershaft
You are absolutly right , when it is used with the manually operated system -- but when you use the touch ,power control , "is it the same hole" ? It doesn't line up with the bail bracket .

Posted: Tue Oct 12, 2004 9:40 pm
by Jim Becker
Touch-Control or hand lift doesn't matter. All of the drawbar, depth control and beam mounting is identical either way.

Posted: Tue Oct 12, 2004 10:07 pm
by John *.?-!.* cub owner
I have one cub with touch control and one without, and the hook up is the same on both. Is it possible you have a homemade depth control lever (they are not unusual) or a different drawbar.