single point

Wed Oct 13, 2004 3:48 pm

I would like to get a single fast hitch point for my cub, Sometime ago I check out a site that had them in 2 different lenths. I want to build a carring platform and I can't remeber the www address for the point and which sould I get long or short?

Thanks for the help
Rick
1958 cub
1939 A

Thu Oct 14, 2004 5:37 am

I think it was here http://www.agri-supply.com/

Thu Oct 14, 2004 9:27 am

Thank You that is the site I was reffering to.

I want to build the platform used on the rear of the cub, does anyone have any pics or could someone tell me if you use the long or short single point?

Thanks
Rick

Thu Oct 14, 2004 11:46 pm

I have found the points at salvage yards that were taken off other implements usually around 30 bucks.

People kid me about it says it looks like a park bench because of the legs hanging down . But those legs are handy if you want to unhook it from the tractor with a load on it . The lega are long enough that it will set on 4x4 and you can unhook or hook-up with out having to get off the cub.

Image

Image


Image

Fri Oct 15, 2004 4:07 am

Ralph, Thank You very much I appreciate the info.

Rick

Nice Job!

Fri Oct 15, 2004 6:31 am

Ralph,

Go ahead and let them laugh. That is one nice piece of work you have there. Wish I had that kind of talent. Don't have the shop and I don't have the welding experience either.

Rick

Sat Oct 16, 2004 5:15 pm

Something like that could be built with drilling and bolting. It would take some amount of hacksaw work but it could be done. It would not be quite as pretty and probably not as strong but you would have to be hauling rocks or pig iron to notice the diff.
Bill