Switch to full style
Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Cub 6 tool bar info

Fri Jun 25, 2010 11:29 am

Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John

Re: Cub 6 tool bar info

Fri Jun 25, 2010 11:43 am

tinnerjohn wrote:Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John

Here ya go:
Image

Re: Cub 6 tool bar info

Fri Jun 25, 2010 11:48 am

I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.

Hank

Re: Cub 6 tool bar info

Sat Jun 26, 2010 6:56 pm

Gator809 wrote:I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.

Hank


Thanks Hank, I had some dimensions from Dale, but evidently I deleted 'em :oops: :oops: :roll:
Bill

Re: Cub 6 tool bar info

Sun Jun 27, 2010 6:50 pm

Thanks fellows. I don't have them here yet, but I want to be ready to mount them. You know how a kid with a new toy is. :D John

Re: Cub 6 tool bar info

Sun Jun 27, 2010 6:55 pm

Tinnerjohn, did you make it to the "world's largest tractor parade" this weekend? Check out the for sale section, I have some cultivator pieces parts for sale, maybe what you need?

Re: Cub 6 tool bar info

Wed Jul 14, 2010 8:11 pm

Moved this back to top. Still need the dimensions if someone can help. I can probably come close by trial and error, but we all know how that can work sometimes. Thanks again. John

Re: Cub 6 tool bar info

Wed Jul 14, 2010 9:38 pm

Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.

Re: Cub 6 tool bar info

Thu Jul 15, 2010 6:47 am

BIGHOSS wrote:Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.


Great. I'll see you this afternoon (I'll be near the pig roasting spit) so we can make the switch.

Bill

Re: Cub 6 tool bar info

Thu Jul 15, 2010 6:58 am

Thankyou Big Hoss and Bill. Have a safe trip there and back and a great time at the Tug. Wish I could make it. Maybe next year. John

Re: Cub 6 tool bar info

Wed Oct 13, 2010 7:34 am

Does anyone have dimentions for this thing ?
Is the bar 1.5 x 1.5 ? How long is it?
How long are the attaching arms, how far along til they bend and wahts the angle ?
I can't find one of these and need to make one but cant find one to look at in person and measure myself, any and all help is appreciated !

Re: Cub 6 tool bar info

Wed Oct 13, 2010 9:15 am

Heres some measurements. The bar is 1.75 sq. X 56". The arms are 1" X 2 3/8 " X 38 1/2" with a 25 degree bend 20" from the tractor end (where they pin to part 6). Hope this helps. If you want, PM your address and I'll mail some pics and measurements. Sorry, but I haven't been able to master that stuff on the computer. John

Re: Cub 6 tool bar info

Sun Nov 11, 2012 6:10 am

Thanks for posting those dimensions a while ago, it's really useful.
I'm curious about the bracket too (part 6) -- can someone tell me how long it is end-to-end, and how thick/wide the piece of steel it's made from is?
-David

Re: Cub 6 tool bar info

Sun Nov 11, 2012 9:01 am

David, I just checked one of mine. I bracket is 1/2"X3" Flat stock, 12 1/2" to inside of bend on long side, 4 1/2" on short side. Don't forget the offset since the toolbar arms are narrower than the finals, unless your custom building that. If it would help, I could send you a tracing of mine if you PM your address. Hope this helps and pause at 11:11 AM to remember our veterans. John
Post a reply