Wed Nov 03, 2004 12:37 pm
could some one post a picture of the correct way to attach a plow to the cub with hydrollic rockshaft?
Wed Nov 03, 2004 12:52 pm
Go to http://www.tmtractor.com
and clidk on the picture archive. Then click on the implement section..... there are excellent photos showing how attachments are installed on the cub.
Wed Nov 03, 2004 2:14 pm
Here is the link BoBo referred too. http://www.tm-tractor.com/gim/193_plow_001.htm
You can see it in the pictures, but they don't all face the same way and if you've never seen one monted before there are a couple things that are not real obvious. Mainly that the drawbar goes in the front final drive mounting holes facing forward, and that the lock bolt must be removed so it can be moved up and down with the depth control lever (rusty part in photos) that you mount to the right fianl drive . There is also a manual on Rudi's site at http://www.cleancomputes.com/Cub/Cub%20 ... index.html