Cub 54-A Decals

Thu Nov 04, 2004 6:29 pm

Does anyone have info about the decals and placement of for the Cub 54-A blade :?:
The manual has only one picture of a decal and the picture is poor at best.

Jim Becker :?: 8)

Thu Nov 04, 2004 7:13 pm

This probably won't help a bit but I have the word International decaled across one of the lifting arms. My 54's a bit newer. Probably from the early 1960's but there you are...

Thu Nov 04, 2004 7:20 pm


Before I put the frame in the de-rusto tank it had Cub 54A on each side of the frame. On the back side of the blade it had an International and a 54 centered underneath that.

Shoot I wish I had taken pictures before :!: :( 8)

Thu Nov 04, 2004 9:21 pm

Mine had International on the back of the blade and 54-A

Thu Nov 04, 2004 9:28 pm

Thanks Jim :!:
Mine looked the same as yours except white. I didn't know if there were any more decals or not. 8)

Thu Nov 04, 2004 11:34 pm

Mine is older than Jim Hudson's. It has a Cub-54A decal on one side of the frame, similar location as JH's, different decal. I think the other side has a patent decal. Don't recall any other without looking. This is one of those things that changed over the years. The older ones don't have a model id plate either.

Fri Nov 05, 2004 8:39 am


K, so we are restoring our 54's. What decals should we be looking for? Is there a part number for the Decal kit? Seeing as I don't have a 54 manual, I can't look that up....

would like to be as accurate as possible.


Fri Nov 05, 2004 11:52 am

I only have a 54A. It was white when new had International across the top back of the blade and a IH emblem on the right end and 54A on the frame. I have read on this board that someone had decals for one of the blades but don't know which. I think I read that the dealer could get one of them. I only know what I read here on the board. Mine has no decals now and is all red. And muddy. I decided to use my Cub. Most people who come in my shop don't know what it is are how its supposed to look.

Mon Nov 15, 2004 9:11 pm

Well since I'm restoring my 54A, I'd be interested in a label kit. As soon as one becomes available, let me know.