Page 1 of 2

IH Auction

Posted: Mon Nov 08, 2004 9:11 am
by John *.?-!.* cub owner
Anyone going to IH auction at Troy, Mo. this weekend?

Posted: Mon Nov 08, 2004 1:58 pm
by Arizona Mike
If it were closer I would go. I talked to Darrell Darst at the Cubarama about this auction and it sounded like it would be very good.

Mike :D

Posted: Mon Nov 08, 2004 2:53 pm
by Bigdog
John, There is an antique tractor auction about 5 miles from me Saturday. I expect between 50 and 100 tractors plus parts and implements. All brands. I guess I know where I'll be.

Posted: Mon Nov 08, 2004 3:10 pm
by IH GIRL
I think someone from here is going. Most likely JP (as deer season opens Saturday also and I know where John jr will be :roll: ) Darrell is really great and comes down to Cub-Arama every year, I am sure it will be a great auction

Posted: Mon Nov 08, 2004 6:55 pm
by John Niekamp
Hummmm,

That's only about 70 miles away from me. Where's it at in Troy, John-CUB?

Posted: Mon Nov 08, 2004 8:03 pm
by John *.?-!.* cub owner
At the fair grounds on HWY 47 just west of Troy. Here's a link to the auctioneer's listing.
http://www.nordwaldauction.com/id289.htm

Posted: Mon Nov 08, 2004 9:30 pm
by Mike Schmudlach
I will be going along with Neal Stone and Louie Schema.
Heading out wednesday afternoon.......stopping at Darryl Darst's on Thursday morning for a tour...............then down to JPs for a look around without any Cub guys lurking in the weeds...............then back north for the Friday night auction and Saturdays Auction. I am going to bring a German built D-219 2 cyl diesel McCormick for the sale.

Should be a good time.

Mike

Posted: Mon Nov 08, 2004 10:01 pm
by Cub-Bud
IH 2 bottom plow for Farmall B

I thought the Farmall B was rated for a SINGLE bottom 14" or 16" plow. :?

I am looking for a pull-type plow on steel or rubber to complement my '45 B. If the above is correct, then all I have been told and read is incorrect and I can broaden my options, right :?:

Posted: Mon Nov 08, 2004 10:04 pm
by nosih
mike, make sure you have room for your block!!!!!!

Big Dog ,

Posted: Mon Nov 08, 2004 10:24 pm
by countershaft
where is that one in Ohio ?

Posted: Mon Nov 08, 2004 11:11 pm
by Mike Schmudlach
Cub Bud,
If a C can pull 2 bottoms why couldn't a B?
Mike

Posted: Mon Nov 08, 2004 11:36 pm
by Cub-Bud
Mike,

Looks like I can start looking for a two-bottom plow...question is...how big can the bottoms be :?:

Posted: Tue Nov 09, 2004 12:32 am
by Jim Becker
Mike Schmudlach wrote:If a C can pull 2 bottoms why couldn't a B?


1 16" for the B vs. 2 12" for the C. The slightly tweaked engine and taller tires might make that much difference.

Posted: Tue Nov 09, 2004 11:35 am
by Mike Schmudlach
Of course the big thing is ....What kind of soil do you have?

Mike

Posted: Sun Nov 14, 2004 11:50 am
by Mike Schmudlach
Got to see @#$% John at the IH auction. We both picked up our blocks from Justin. What a deal!!!!!!
Bought a White C for $600.
Mike