Just ordered another set of brake bands for '67 Loboy. These ones will be coming from OEM Tractor Parts. Hopefully they will be the ones I install. The other 2 sets are on the way back to the vendors. Both excellent vendors, just ended up with a bad product.
Anyone ever order the bands from OEM?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
3rd. Try for brake bands
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
3rd. Try for brake bands
Just Do It !
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
EZ I suspect that most if not all vendors including Case IH are getting products from the same or similar sources nowadays. I doubt that anything like brake bands is produced in the states.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Rudi,
$63.25 is quite a bit more. I paid $50 for a new band.
Thanks for checking that out. I called a few places in T. Bay etc..
Nobody will give any kind of price without seeing what I have. That's living in the bush for you.
The set from OEM are $23.50US, which works out to $28.04Cdn. not including duty, shipping etc...
The guy told me that the bands will be riveted, and of good quality, i.e. no complaints concerning fit have come to his attention. OEM prides itself on product that is "American Made" according to it's web site. They seem to be well respected on Ebay as well, but like any business I'm sure they have a share of complaints as well.
Hoping for a good fit!
$63.25 is quite a bit more. I paid $50 for a new band.
Thanks for checking that out. I called a few places in T. Bay etc..
Nobody will give any kind of price without seeing what I have. That's living in the bush for you.
The set from OEM are $23.50US, which works out to $28.04Cdn. not including duty, shipping etc...
The guy told me that the bands will be riveted, and of good quality, i.e. no complaints concerning fit have come to his attention. OEM prides itself on product that is "American Made" according to it's web site. They seem to be well respected on Ebay as well, but like any business I'm sure they have a share of complaints as well.
Hoping for a good fit!
Just Do It !
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
Brake bands
I also have had quite alot of trouble with aftermarket brake bands. The 2 problems I have been having is either the lineing comes off the band or the rod brakes right at where its spot welded to the band. I have come to the conclusion that the aftermarket bands are very poor quality so what I have been doing is getting the brake bands relined.It cost about $25.00 a band. they are relined with quality linings just like the originals. The place I send them to is in Erie Pa. I dont have the address handy but if anyone wants it just e-mail me at tractorman453657@yahoo.com. i would be glad to give the address.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Biggy,
You were right, most are getting the bands from the same place.
I just got my bands fro OEM, guess what?
They are the same glued on bands that I just sent back to my Canadian supplier. Same tags and all. Plus, they don't fit either!
What is going on?
Is anyone out there doing new brakes on thier Cubs? I keep trying to tell these people making them, "the metal they are using for the band is TOO THICK!!" It's almost double the thickness of the originals, and there is hardly any give to them, there has to be "some" flex so they can work as intended for the design.
I was assured by the Sales guy, "we do not glue our bands" "we try to stay true to the original" "rivets always" "no complaints of any of our brakes for Cubs" " none have ever come back".
I really don't know what to do now, all I can hope for now is to contact someone who has restored/refurbished alot of Cubs, and has experience with doing brakes, and can provide a supplier.
Short of that I guess I could try getting the drums turned down abit by a machinist 'til I get a good fit.
Unhappy Cubber
You were right, most are getting the bands from the same place.
I just got my bands fro OEM, guess what?
They are the same glued on bands that I just sent back to my Canadian supplier. Same tags and all. Plus, they don't fit either!
What is going on?
Is anyone out there doing new brakes on thier Cubs? I keep trying to tell these people making them, "the metal they are using for the band is TOO THICK!!" It's almost double the thickness of the originals, and there is hardly any give to them, there has to be "some" flex so they can work as intended for the design.
I was assured by the Sales guy, "we do not glue our bands" "we try to stay true to the original" "rivets always" "no complaints of any of our brakes for Cubs" " none have ever come back".
I really don't know what to do now, all I can hope for now is to contact someone who has restored/refurbished alot of Cubs, and has experience with doing brakes, and can provide a supplier.
Short of that I guess I could try getting the drums turned down abit by a machinist 'til I get a good fit.
Unhappy Cubber
Just Do It !
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Hey EZ, Maybe you should talk to this person. This ad is on this sites home page classifieds.
New Replacement Brake Bands For Cub, Cub Lo-Boy11/17/04 04:36NoDetailAsk your local Farm Equipment dealer or large independent service center about this new brake band offered by Hy Capacity. Part number HH350967 these brake bands can be purchase individually for around $30 each
New Replacement Brake Bands For Cub, Cub Lo-Boy11/17/04 04:36NoDetailAsk your local Farm Equipment dealer or large independent service center about this new brake band offered by Hy Capacity. Part number HH350967 these brake bands can be purchase individually for around $30 each
Then came Bronson
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
I have been seeing a lot of posts on different websites about replacement parts not fitting, both on trucks, old tractor, as well as newer tractors, also coming from Ford, JD, etc. Most of the reports I've seen regard parts mnaufactured off shore. Apparenly somewhere along the line the parts aren't manufactured to correct specs. Whether it is the off shore manufacturer, or the person sending the specs being careless. I think the companies then just put the parts in stock without verifying whether ot not they will actually fit.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bill V in Md
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Brake Bands
EZ,
A while back I bought a couple of new brake bands from the local IH dealer in Frederick, Maryland (H.B. Duvall, Inc.). I have not installed them yet, but they are definitely riveted, and the band is 0.08" thick. The box indicates CNH (Case New Holland) original parts. The part no. is 350967R22 (not 21 as is listed in my parts catalog). They come with the rod attached. There is no other information to indicate who actually manufactures these parts for CNH.
A while back I bought a couple of new brake bands from the local IH dealer in Frederick, Maryland (H.B. Duvall, Inc.). I have not installed them yet, but they are definitely riveted, and the band is 0.08" thick. The box indicates CNH (Case New Holland) original parts. The part no. is 350967R22 (not 21 as is listed in my parts catalog). They come with the rod attached. There is no other information to indicate who actually manufactures these parts for CNH.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Bill V,
Yeah, those are the ones for the older Cubs. The first set I bought was from Case/IH. They were riveted, but they were "too small". My dealer confirms that they are an aftermarket made for CNH. I sure wish they were a little bigger, the quality is there. I hope you have better luck than me.
Yeah, those are the ones for the older Cubs. The first set I bought was from Case/IH. They were riveted, but they were "too small". My dealer confirms that they are an aftermarket made for CNH. I sure wish they were a little bigger, the quality is there. I hope you have better luck than me.
Just Do It !
-
- 10+ Years
- Posts: 52
- Joined: Thu Jul 01, 2004 6:07 am
- Location: Shelby County Alabama
Just put a set of bands I got from JP's on my '49. Had to hold my mouth just right and do a little pushing but they sort of went right in. Still got a little to do till My Missey is ready to go but all indications look good. I will say this about JP's, service is exceptional and parts, both new and used have meet or exceded expectations. Also got some parts from TM, they did great also. Seems to pay to support people who advertise on this board.
Got a Cub and a good team of horses, nothing else I need or want except maybe another Cub and some more equipment!
Who is online
Users browsing this forum: No registered users and 39 guests