MOWER BLADE

Sat Nov 13, 2004 10:00 pm

HEY CUBBERS
I NEED SOME HELP . I'm trying to find a replacement blade for my yet to be identified belly mower. IT IS A ONE PIECE with a 4 hole pattern straight across 40x4 1/2 ??. Can anyone help??
Thanx inadvance
Ghostdog

Sat Nov 13, 2004 10:30 pm

Ghostdog:

Dig you check out the Mower Manuals on the Cub Manual Server at the link below?

It may go a long way to identifying your mower and then getting the part should be easy.

THANKS FOR THE INTEREST

Sun Nov 14, 2004 11:41 am

Rudi THANKS FOR THE INTEREST,
Yes I did check as you suggested the 22 deck looks very close however it speaks of two blades again I only have one
Is this an item that can be made modified etc??

Sun Nov 14, 2004 11:47 am

Ghostdog:

Not sure. The C-2 has come up in a number of threads. There was one a week or so ago, - do a search on Mowers, Mower Decks etc.,

I think it was John Niekamp who was looking for info on a single blade type, possibly made by Danco and looks like the C-2.

That is the best my brain can come up with at the moment. If I can find it I will post with the thread link here.

Mon Nov 15, 2004 9:25 am

Does the mower look like this http://community.webshots.com/photo/155454219/155465278nwgnRf



and does it have swing blades on it?

I bought replacements through the local Case/IH dealer.


TBAR

Mon Nov 15, 2004 9:53 am

Tbar - he stated that it is one piece 40" long by 4 1/2" wide. Not the typical swinging blades like you see on the 42" Woods.