Page 1 of 1

Breather tube

Posted: Mon Nov 15, 2004 12:04 pm
by Ricaroo
I would like to check and clean the breather pipe, is it possible to remove it without taking the hood off? I can get at the fitting on the breather but can I get at the other end?

The tractor has started to smoke a little and I am wondering if the pipe is clear.

Thanks
Rick

Posted: Mon Nov 15, 2004 12:13 pm
by John *.?-!.* cub owner
You cna, but it's a close fit and requires a little patience. Also make sure the screw in fittings, especially the one at the block, are clear.

Posted: Mon Nov 15, 2004 5:02 pm
by Ricaroo
Thank You, I will let you know how I make out.