This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Lighting switch wiring question

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
mchattod
10+ Years
10+ Years
Posts: 34
Joined: Sat Jul 19, 2008 9:37 pm
Zip Code: 85650
Tractors Owned: '54 Cub
Location: Sierra Vista, AZ

Lighting switch wiring question

Postby mchattod » Fri Aug 27, 2010 12:22 pm

The lighting switch diagram is very hard to read.

Image

Looking at the back of my lighting switch. I'll call the top screw at the 12 o'clock position number 1 and go clockwise.

1. Headlight and dimming coil
2. Fuse
3. ???
4. ???
5. ???
6. Dimming coil

I know the Voltage Regulator "L" terminal and tail light have to connect somewhere but, I'm not sure where.

Image

Thanks,
Desert Dan

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:

Re: Lighting switch wiring question

Postby Bigdog » Fri Aug 27, 2010 1:18 pm

Although this is the 4 position switch, If you look, the screw terminals are numbered and the connections are the same for the 3 position switch.
#1 is the input from the power source (VR - L terminal)
#2 is the tail light connection
#3 is the headlight connection

Image
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com


Return to “Farmall Cub”

Who is online

Users browsing this forum: CaperKen and 50 guests