Cub Levelling-Grader blade

Thu Nov 18, 2004 8:08 pm

Does anyone have the levelling -grader blade for the cub? I have most of it but am missing a couple of bars and would like to have a couple of measurements. I should be able to duplicate them. Its not the 54A blade.


Fri Nov 19, 2004 9:41 am

The manual is on Rudi's server. I've had two of them, but now have most of a 54-A blade. Will fabricate or purchase from TM Tractor the rest of parts needed. TM's site may have pictures and parts for sale for your blade.

Fri Nov 19, 2004 3:18 pm

Interesting that this post is up. Rudi and I were working on having me put together detailed drawings of the mounting frame for a >1952 54A. I'm in the same boat as you it would seem where I only have the grader part of the plow. The finished drawings will be uploaded to Rudi's site upon his healthy return to Cubland.

I'd be happy to send you what I've got so far if you'd like. At present the details include measurements for the Front Axle Hanger, the Axle Mounting Bracket, the Bell Crank Extension, Skids, Spacers and rough ideas for the left and right braces.

Fri Nov 19, 2004 3:20 pm

Oops, I see you don't need parts for a 54A. Either way, you could retrofit to fit to your application though.

Fri Nov 19, 2004 9:50 pm

Thanks Scotty. I have a 54A blade here also. Its all complete. Its just the grader, levelling blade that I need a few parts for.


cub leveling-grader blade

Fri Nov 19, 2004 11:36 pm

I have two blades one is the very early 1948( according to TM tractor parts) one is the 1949-1952. Both are complete. What measurements do you need, and of witch one?

Sat Nov 20, 2004 6:01 pm

Thanks for the offer Scotty, last summer I visited with Jim Hudson and took measurements and tracings of needed parts. They are still in the cab of the pick-up. Don't have a picture hosting service yet, but would be glad to share. Click on site below to see frame I built to serve as alternate drawbar. Send e-mail addy and I will send pictures direct to you.