Does anyone have the levelling -grader blade for the cub? I have most of it but am missing a couple of bars and would like to have a couple of measurements. I should be able to duplicate them. Its not the 54A blade.
Mike
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub Levelling-Grader blade
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
Cub Levelling-Grader blade
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
The manual is on Rudi's server. I've had two of them, but now have most of a 54-A blade. Will fabricate or purchase from TM Tractor the rest of parts needed. TM's site may have pictures and parts for sale for your blade.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
- ScottyG
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
Interesting that this post is up. Rudi and I were working on having me put together detailed drawings of the mounting frame for a >1952 54A. I'm in the same boat as you it would seem where I only have the grader part of the plow. The finished drawings will be uploaded to Rudi's site upon his healthy return to Cubland.
I'd be happy to send you what I've got so far if you'd like. At present the details include measurements for the Front Axle Hanger, the Axle Mounting Bracket, the Bell Crank Extension, Skids, Spacers and rough ideas for the left and right braces.
I'd be happy to send you what I've got so far if you'd like. At present the details include measurements for the Front Axle Hanger, the Axle Mounting Bracket, the Bell Crank Extension, Skids, Spacers and rough ideas for the left and right braces.
"Henry" 1948 Farmall Cub
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
- ducati750
- 10+ Years
- Posts: 80
- Joined: Sat Nov 13, 2004 2:00 pm
- Location: West Mansfield, Ohio
cub leveling-grader blade
I have two blades one is the very early 1948( according to TM tractor parts) one is the 1949-1952. Both are complete. What measurements do you need, and of witch one?
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Thanks for the offer Scotty, last summer I visited with Jim Hudson and took measurements and tracings of needed parts. They are still in the cab of the pick-up. Don't have a picture hosting service yet, but would be glad to share. Click on site below to see frame I built to serve as alternate drawbar. Send e-mail addy and I will send pictures direct to you.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
Who is online
Users browsing this forum: Ole90633 and 31 guests