Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
All 3 of my Cubs have the overflow tube broken off and this may not be a correct police type fix it certainly worked and can be done with the hood on.Drilled a 9/64 hole in a 1/4 inch bolt and a jam nut on the outside of the neck.The bolt fits right in the broken tube and the threads help hold the tube in place.
I like it! A nice fast fix for an annoying problem on so many cubs. A copper drain pipe or a rubber hose directing the water below the radiator is much preferred over no drain where water runs down the radiator and rusts the lower radiator bolts or is thrown back over the engine by the fan.
That I like Supper cool Why I did not think of it I will never know have to give you an A + on this
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Very good how to you've made there Bear.
I like it since there's no heating involved to add to the problem plus you can do this with the hood on.
I'll need to look mine all over and see if this is something that needs added.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
I think that we might have found another Tip of the week! (Rudi!!)
I like farmer fixes because you need only ingenuity and basic skills...exactly my level!
Mike in La Crosse, WI
Mike in Gibsonia, PA
Just in case you are a butterfingers like I can be occassionally, you might want to slip a shop rag in the radiator opening just enough to keep a stray bolt from slipping from your fingers and falling in. Naturally you will want to remove the rag once the bolt is tightened.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
Looks like a neat idea, and mine is broken off at that same spot too. Only problem with that is I have a low pressure pressure cap and it would get in the way. Maby I could grind down the head of the scres some so the cap would go past. May have to try it this spring.
I aagree with boss. All these good ideas and fixes and I never thought of a one. My hat is off on this one and many others.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
Very, very nice fix A good was to use what you have hanging around.
Cub Tip of the Week! December 5th, 2010
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
mine is broken in the same spot, any tips or tricks to this? did you use a drillpress? what kind of hose are you using as the over flow tube
1949 Cub "The Anti-Christ"
1948 Cub "Trailer Queen"
1951 Cub "Pinky"
1948 Cub "Rusty"
1953 Super A
1950 John Deere MT
1941 John Deere B
1944 John Deere B
1942 Case VAI
1974 Ford 3000
I'm tired of soldering that copper tube, hoping it will stay in place. Thanks, Bear!! Sounds like a permanent fix.
Gonna put this tip to use in another place. Crankcase ventilation on a Bobcat skid steer, Wisconsin VH4d engine. $41.00, air horn adapter, which simply fits between carburetor and the air cleaner to carburetor hose. Hose from crankcase fits into the side of the air horn adapter.
Air horn adapter, which is formed in one piece, broke. Replaced it. Broke again.
I have an excuse. CRS.
Who is online
Users browsing this forum: No registered users and 5 guests