Page 1 of 1

Echlin VR850 Regulator??

Posted: Mon Dec 20, 2004 9:09 am
by 9mules
Reading all the threads concerning regulators I found that this model requires a VR800 resistor package.
Can anyone confirm this?
I've a 1101355 generator, I replaced burnt cutout with VR850, NAPA people didn't mention a resistor package.
Problem I've got now is a pegged negative ammeter reading and a rebuilt generator thats to hot to touch.
Before I go and do any tests I don't want to be spinning my wheels.
As far as new for the regulator was the L terminal.
I ran a wire from L terminal to my kill/run switch per schematics at Bob Melville's site.
Thanks