This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Ron You don't have to get them very hot to melt canning wax. When Bev makes Jelly she heats the wax in a pot that is in another pot filled with water. How hot is that? definately less than 212 degrees and we are near sea level.
Its the steel Blades that is the real trick. wouldn't have thought that any one would try to melt the shovel or put in a plastic bladed shovel. Us old geezers are too cheap to waste like that. If you were brought up in the depression you learned "just what it takes to do it right and no more than that". Also don't use all your flour to make bread today. Some will be stale later in the week, make fresh. Besides the oven heats the kitchen. None of this "Super Sizing" excess crap in Those Days.
Bill
Bill
"Life's tough.It's even tougher if you're stupid." - John Wayne
" We hang petty thieves and appoint the great ones to public office." - Aesop
I push gobs of snow with my cub- no chains-
i think the trick is front and especially rear wheel weights
ag tire good tread- off ya go!! rsvp brian.piersol@fandm.edu
Hey guys who plow snow ...LUBRICONE (by Kano Labs...the KROIL guys) is a superior clear, dry, industrial silicone spray . Use it on snow shovels, snow plow blades...snow blower augers too! Available at (ALL TOGETHER NOW...www.kanolabs.com)
"Save The Possums...Collect The Whole Set" "Tennessee Sun-Dried Possum...Heaven In A Can"
I am in Canton, CT and have been having fun plowing. Ag tires, chains and weights front and rear. If I have the blade angled, and snow starts to build up, I just jog the wheel to the side momentarily which seems to make the snow slide off. My blade is rusty, so the snow likes to stick to it. I am going to hit the blade with my big old wire wheel...it's a workout, it weighs a LOT. Then I'll wax it. Wire wheels leave an almost burnished finish, much more slippery than sanded steel. My most valuable tip I received as a newbie snow pusher? "Push it far enough off the driveway so you have room to push the next snowfalls off the drive." If I had left the first fall right at the edge of the driveway, I never would have been able to clear it the second time. I have a big 4' snowblower that was supposedly on a cub. I am going to paint it and put a motor on it this summer, and next year, I'll THROW it all away! (I hope). Hal in CT