Working on an IH carb from a 52 Cub and was wondering about the recommended way of replacing the inlet screen. What's the least destructive way to remove the old screen and install a new one?
Thanks.
How to Replace Carburator Inlet ScreenModerator: Team Cub
3 posts
• Page 1 of 1
How to Replace Carburator Inlet ScreenWorking on an IH carb from a 52 Cub and was wondering about the recommended way of replacing the inlet screen. What's the least destructive way to remove the old screen and install a new one?
Thanks. So many tractors, so little time.
Re: How to Replace Carburator Inlet ScreenPush the old one out from the inside of the fuel inlet with the short end of a small Allen wrench. Then, push the new one in with the eraser end of a pencil.
Whoops, forgot to tell you to remove the needle and seat first. Don McCombs
MD, Deep Creek Lake "1950 Something" Farmall Cub, Cub-193 Moldboard Plow 1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower 1948 Farmall Super A, IH 22 Mower 1951 Farmall Super C w/FH
Re: How to Replace Carburator Inlet ScreenAnd that one has just became the Cub Tip of the Week! March 26th, 2011
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie Cub Manual Server
3 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: gitractorman and 5 guests |
|