This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Finally got it together (well, almost . . . )
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Finally got it together (well, almost . . . )
This is a test case, my first attempt to post a photo.
Ran out of warm enough weather, up here in New Jersey, to finish painting the hood. But it runs again (after 2 years in my garage in pieces)
http://public.fotki.com/PWS/projects/paul_s_cub08.html
Ran out of warm enough weather, up here in New Jersey, to finish painting the hood. But it runs again (after 2 years in my garage in pieces)
http://public.fotki.com/PWS/projects/paul_s_cub08.html
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
well, that didn't work too well. Hmmmm . . ..
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Paul, go to fotki and make your album public access.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
I'm still looking for how to do that. Do you have fotki BigDog? I'm just using the evaluation free membership right now - wanted to try it out first . . .
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
That works!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Thanks for the help guys - I couldn't figure out how to get the photo to appear on the post
No, the head is original and didn't go into the tank - actually I only wire brushed the engine, cleaned it up real well with thinner, and then primed with etch primer. Everything else went into the electrolysis tank.
No, the head is original and didn't go into the tank - actually I only wire brushed the engine, cleaned it up real well with thinner, and then primed with etch primer. Everything else went into the electrolysis tank.
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Thanks for the kind comments.
But no exageration - it was the help and expertise contributed by all of the members of this site that has gotten me this far on my first project. It's truly been a "community effort" thanks to you guys. I never could have done this on my own, and half the fun of the project was being a part of this site.
Still to go:
1. paint hood/tank
2. have grill made by Bruce Sanford
3. rewire
4. adjust carb float
5. figure out why Touch Control is so rough operating
Hope it doesn't take another 2 years to do the rest!
But no exageration - it was the help and expertise contributed by all of the members of this site that has gotten me this far on my first project. It's truly been a "community effort" thanks to you guys. I never could have done this on my own, and half the fun of the project was being a part of this site.
Still to go:
1. paint hood/tank
2. have grill made by Bruce Sanford
3. rewire
4. adjust carb float
5. figure out why Touch Control is so rough operating
Hope it doesn't take another 2 years to do the rest!
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
- KenHigginbotham
- 10+ Years
- Posts: 54
- Joined: Mon Dec 27, 2004 11:47 am
- Location: Ga, Douglasville
-
- Team Cub Guide
- Posts: 3280
- Joined: Thu Feb 20, 2003 4:54 pm
- Zip Code: 71203
- Tractors Owned: 1948,55, and 56 Farmall Cubs.
- Circle of Safety: Y
- Location: Louisiana
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
Paul_NJ
i have one of Bruce's grills that's not immediately going on a tractor. if you need it before bruce can get you one, we can swap it around
2. have grill made by Bruce Sanford
i have one of Bruce's grills that's not immediately going on a tractor. if you need it before bruce can get you one, we can swap it around
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Hi Art
Thanks for the offer. Bruce had asked me to make templates for the top and bottom curves of the grill from my hood and radiator lower castings so that he could match everything, so I think I'll wait and do that. And, considering how long it takes me to do everything else, it's not exactly holding me up. But I do appreciate your suggestion.
Paul
Thanks for the offer. Bruce had asked me to make templates for the top and bottom curves of the grill from my hood and radiator lower castings so that he could match everything, so I think I'll wait and do that. And, considering how long it takes me to do everything else, it's not exactly holding me up. But I do appreciate your suggestion.
Paul
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
Who is online
Users browsing this forum: Jw79nc, Mcdaniel2903 and 11 guests