This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Oil Seal #

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Maritimer
10+ Years
10+ Years
Posts: 145
Joined: Mon Feb 02, 2004 7:05 pm
Location: Brookfield Nova Scotia

Oil Seal #

Postby Maritimer » Thu Feb 03, 2005 9:36 pm

Hi all,I'm putting a new oil seal on the steering shaft. I looked up the part # in the parts manual on Rudi's site, it say's I need # 350 892 R91. The list on the FAQ sheet say's part # is 385 703 r92, and the original seal that I took out of it is # 358 837 R91. Does anyone know which # I need for the seal? I'm going to use either the CR brand or a National.
Mike
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......

SPONSOR AD

Sponsor



Sponsor
 

Donny M
10+ Years
10+ Years

Postby Donny M » Thu Feb 03, 2005 9:40 pm

I think it's a CR8677 8)

Maritimer
10+ Years
10+ Years
Posts: 145
Joined: Mon Feb 02, 2004 7:05 pm
Location: Brookfield Nova Scotia

Postby Maritimer » Thu Feb 03, 2005 9:50 pm

Yes I Seen that on the FAQ list. That Part # that matches up with cr 8677 is 385 703 R92. The # that came out of mine is 358 837 R91. Will this matter at all? Donny, did you use CR 8677? Was it a good fit? Did anyone else put in a new steering shaft oil seal?
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......

Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3543
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Thu Feb 03, 2005 9:57 pm

My version of the parts catalog, TC-37F, says the part number is 385703R91, which will sub to 385703R92.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman

User avatar
johnbron
Cub Pro
Cub Pro
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Zip Code: 00000
Location: Puyallup, WA.

Postby johnbron » Thu Feb 03, 2005 10:14 pm

:lol:



This is what is on ATIS FaQs



Steering Wheel Shaft seal


I-H=(385703R92)


CR= (8677), CR (545294)


Tecumseh= (788031)
Then came Bronson

Donny M
10+ Years
10+ Years

Postby Donny M » Thu Feb 03, 2005 10:28 pm

Yes I did use the CR8677 it fits well and so far no leaks. It's got a nice red coat on it now or I'd take a picture :lol: 8)


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 29 guests