Loader Question

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Dave Hull
10+ Years
10+ Years
Cub Star!
Cub Star!
Posts: 227
Joined: Sun Jul 20, 2003 6:16 pm
Zip Code: 38506
Tractors Owned: Cub demo
Location: Cookeville, TN

Loader Question

Postby Dave Hull » Fri Feb 04, 2005 4:14 pm

Anybody got a cub with the two arm loader. I have seen a photo of one in Updikes Cub & Cadet Book but never seen one on an actual tractor. Are parts for them hard to come by? What would one cost if I could find one in decent shape?

Dave H in TN

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Loader Question

Postby John *.?-!.* cub owner » Fri Feb 04, 2005 5:02 pm

Dave Hull wrote: What would one cost if I could find one in decent shape?
Dave H in TN
About the price of 1 1/2 to 2 cubs.
If you are not part of the solution,
you are part of the problem!!!

Eric
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 53
Joined: Sun Dec 21, 2003 9:18 pm
Location: Farmington, CT

Postby Eric » Tue Feb 08, 2005 6:45 pm

I just recently picked up a two arm loader for my 49 cub. It is made by Wagner. This is the trip style as Wagner made two for the cub. One that just tripped the bucket and another that had a hydraulic cylinder to power dump the bucket. This should be very handy when I install this spring. Just received the hydraulic tap-in block from TM Tractor.
-Eric

Dave Hull
10+ Years
10+ Years
Cub Star!
Cub Star!
Posts: 227
Joined: Sun Jul 20, 2003 6:16 pm
Zip Code: 38506
Tractors Owned: Cub demo
Location: Cookeville, TN

Send Pix

Postby Dave Hull » Sun Feb 27, 2005 4:15 pm

Eric,
Please send some pix, what is a loader like that go for?

Did wagner make all the Cub 2 arm loaders? Any manuals that I could get a copy of?

Thanks
Dave

Eric
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 53
Joined: Sun Dec 21, 2003 9:18 pm
Location: Farmington, CT

Postby Eric » Sun Feb 27, 2005 6:05 pm

I'll try to get some pics as soon as the snow melts a little. I picked up mine from a guy here in CT for $700, minus the rear mounting brackets that I need to make up. Trying to locate someone with the same model to get measurements. Wagner, IH, and Henderson are the loader makers for the cub that I know of. Of what I have heard, best to least went as follows--IH, Wagner, Henderson. Prices for an IH loader as crazy though--one is on eBay now for around $2,400.00!!! :shock: I have a copy of a the Wagner loader manuals--model WM1 (trip style) and the 45 (Hydraulic tilt bucket). Let me know your name and address via e-mail for a copy.
Thanks, -Eric
Also keep your eye out for someone with a model WM1 (trip style) as I need the rear mounting bracket measurements.

Dave Hull
10+ Years
10+ Years
Cub Star!
Cub Star!
Posts: 227
Joined: Sun Jul 20, 2003 6:16 pm
Zip Code: 38506
Tractors Owned: Cub demo
Location: Cookeville, TN

Address

Postby Dave Hull » Sun Feb 27, 2005 6:25 pm

Eric,
My address is
Dave Hull
TRW Commercial Steering
P.O Box 60
Lafayette, IN 47902-0060

Thanks
Dave
would be interested of pictures of loader from manual if you can take picture or scan.

User avatar
George Willer
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7012
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont

Postby George Willer » Sun Feb 27, 2005 6:35 pm

Dave,

Here's Mick Johnson's Lo-Boy/loader at CubFest 2003. I think,(but I'm not sure) it's a Wagner.

Image
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce

Dave Hull
10+ Years
10+ Years
Cub Star!
Cub Star!
Posts: 227
Joined: Sun Jul 20, 2003 6:16 pm
Zip Code: 38506
Tractors Owned: Cub demo
Location: Cookeville, TN

Other Brands

Postby Dave Hull » Sun Feb 27, 2005 7:10 pm

I would love to see pics of the other brand two arm loaders,
Thanks George
Dave

Eric
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 53
Joined: Sun Dec 21, 2003 9:18 pm
Location: Farmington, CT

Postby Eric » Sun Feb 27, 2005 7:33 pm

Judging by the manual I have, that loader looks to be a Wagner model 45, because of the tube design and hydaulic dump on the bucket. Does it look similar to the one you are looking at? I wish I could have found one like that with the power dump. To dump mine, you pull on this handle connected by 3/8" rod and a spring loaded pin lets the bucket free fall. To reset, you simply lower down and the pin clicks in again. But as I mentioned before, the price was right! 8)
-Eric

User avatar
johnbron
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Location: Puyallup, WA.

Postby johnbron » Sun Feb 27, 2005 9:36 pm

Heres a 1-armed bandit for a Cub for a bandits ransom of only $4000 and that dont include the tractor. :roll: http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 62763&rd=1
Then came Bronson

User avatar
beaconlight
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Sun Feb 27, 2005 9:59 pm

Just saw this on ebay. Hope it helps.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 54402&rd=1

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
Buzzard Wing
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10455
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Postby Buzzard Wing » Sun Feb 27, 2005 11:00 pm

Yeah, that is the nice one.... never seen a real one only pictures,
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12145
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Send Pix

Postby Jim Becker » Thu Mar 03, 2005 2:54 pm

Dave Hull wrote:Did wagner make all the Cub 2 arm loaders? Any manuals that I could get a copy of?


2-arm tube-frame loaders were made for the Cub by Henderson, Twin-Draulic and Wagner, maybe others. Henderson made 3 versions that I am aware of.

Eric
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 53
Joined: Sun Dec 21, 2003 9:18 pm
Location: Farmington, CT

Postby Eric » Thu Mar 03, 2005 4:39 pm

I have a Wagner model WM1. Does anyone have this same model loader?? :?: This is the trip style dump bucket. I badly need measurements for the rear brackets. Please help :(


Return to “Farmall Cub”

Who is online

Users browsing this forum: inairam, Stanton and 1 guest