Hi All, I have another seal question. Part # 251379 R92 is the oil seal behind the distributer. Is this the same as 251379 R91? This one says it is for the magnito according to the FAQ list.
Mike
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Another seal question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
Another seal question
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Mike - It should fit. The R number is a revision number indicating a minor change or improvement in the part. If the revision does not change the application, the part number stays the same and the R number or revision number increased by one. This would indicate that the part would be compatible with earlier revisions. In theory, a higer revision of the same part number will always replace an earlier version. But an early part will not always work when replacing a later revision.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
Who is online
Users browsing this forum: Glen and 22 guests