Re: Arm & a Leg (update) Added Pics
Posted: Sun Apr 01, 2012 8:57 am
Yep, that's yellar alright. Lookin' good. Your trailer almost looks like a twin to mine.
Farmall Cub
The "International" House of Cubs (est. 5/10/1999)
https://www.farmallcub.com/phpBB2/
Arm & a Leg (update) (All Finshed) Added Pics
Page 2 of 3
Re: Arm & a Leg (update) Added Pics
Posted: Sun Apr 01, 2012 9:13 am
that is looking real good clint.
Re: Arm & a Leg (update) Added Pics
Posted: Sun Apr 01, 2012 7:58 pm
Clint,
How did you prep the surfaces and what kind of paint did you use? I'm getting ready to rebuild my engine and I was wondering how you cleaned yours.
How did you prep the surfaces and what kind of paint did you use? I'm getting ready to rebuild my engine and I was wondering how you cleaned yours.
Re: Arm & a Leg (update) Added Pics
Posted: Sun Apr 01, 2012 11:24 pm
it was first sand blasted then tore completly apart to get all of the sand out and repaired. then put back together, all but the small parts. I took a wire brush on a drill to any spots that had any dirt or surffest rust. For the oil spots i used paint thinner or starter fluid and a rag to clean off, then paint it. I used Case IH paint. Over all it cost less to use it. Thought it would cost more.
A gallon cost me $60 or $65.
A gallon cost me $60 or $65.
Re: Arm & a Leg (update) Added Pics
Posted: Mon Apr 02, 2012 12:54 am
nice job on the restro-rebuild, what size rear tires are those they looked wide to me...
Re: Arm & a Leg (update) Added Pics
Posted: Mon Apr 02, 2012 8:03 am
I like the CaseIH paint a lot. I did find the yeller to be quite a bit more money than red or white when I recently bought paint. Must be something precious in the pigment??
Re: Arm & a Leg (update) Added Pics
Posted: Mon Apr 02, 2012 9:09 am
BullDAWG wrote:nice job on the restro-rebuild, what size rear tires are those they looked wide to me...
rear tire size is 8.3
Re: Arm & a Leg (update) Added Pics
Posted: Sat Apr 07, 2012 7:29 pm
Hey Clint...Very NICE job so far 
Lookin' forward to seein' the finished product 
...'Country'
Lookin' forward to seein' the finished product ...'Country'Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 4:25 pm
Well It took a lot longer then i wanted it to but it is all done. It has been for a little bit now but i just now have had the time to get the pics and post them on here. sorry it took this long. some of you may have seen it in the fall at the Hog Waller or a pic of it there, But i did not wont to leave this post with no ending so Here it is. I had some good and some bad times on this one. Dont know if i will ever sandblast one again or not Lot Of Work but i think it was worth it in the end. I am happy with the out come and hope to do another one soon.
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 4:36 pm
Looking Good Clint. Nice Job!
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 5:11 pm
Looks good Clint. All those bits and pieces fitting together.
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 5:15 pm
that came out really nice clint, nice job.
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 5:49 pm
Looks real good Clint nice job
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 5:49 pm
Looks great, Clint.
Re: Arm & a Leg (update) (All Finshed) Added Pics
Posted: Tue Jan 01, 2013 6:48 pm
Very nice job Clint!
Makes me want to paint one of mine.
Makes me want to paint one of mine.