This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Changing generator belt

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Bob McCarty
Team Cub
Team Cub
Posts: 11851
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Changing generator belt

Postby Bob McCarty » Sat Mar 05, 2005 7:43 pm

I've changed the fan belt before, but with the generator belt being shorter, it looks like there may be more involved in getting the new one on. Suggestions, directions, or tricks? Thanks, Bob
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Sat Mar 05, 2005 7:49 pm

The generator belt goes on before the fan belt. The fan assembly will need to come off so the gen belt can be replaced.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sat Mar 05, 2005 9:25 pm

Can be done slowly and cautiously so as not to damage radiator. Remove generator strap and lay to side, and remove the breather (gives more room to work). unbolt the radiator shroud. Loosen fan bolt so belt can be slipped off crank pulley. Then lift fan and shroud up and to the side. Change belt over the rear of the fan pulley, and reinstall everything.
If you are not part of the solution,
you are part of the problem!!!
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 50 guests