Littlecub, Tim Talleur (tst) is the only one I know of that is refitting the rear main seal now. You can PM him (private message) or I think he has an ad under the Classified for services available. Also, welcome to the Forum.
Bob
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rear Main Seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 11827
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Rear Main Seal
Last edited by Bob McCarty on Mon Dec 02, 2013 5:05 pm, edited 1 time in total.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 3
- Joined: Mon Dec 02, 2013 9:34 am
- Zip Code: 65202
Re: Rear Main Seal
Thanks ill try him. It's nice to have people that still now about the cool stuff thanks again
- RedFox
- 10+ Years
- Posts: 167
- Joined: Mon Oct 12, 2009 7:22 pm
- Zip Code: 00000
- Tractors Owned: -
'77 Cub "Daisy"
'47 Farmall A "Poppy"
Re: Rear Main Seal
I happened to be looking at the TM Tractor site last night after being arms into my Cub, wanted to see what was new there....if I read it correctly, they have a rear seal and rubber grommet that only fits the new rear seal retainer they sell. I am sure the folks rebuilding them here on the forum are equal or greater quality, just givin' you another possible option.
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
- Contact:
Re: Rear Main Seal
with all the adhesives out there, why wouldn't that work? i had an tav that had loose fitting wheel bearing in the front spindles and the factory fix was to use a lactate adhesive on them. it worked for many years without a problem.
-
- 10+ Years
- Posts: 3
- Joined: Mon Dec 02, 2013 9:34 am
- Zip Code: 65202
Re: Rear Main Seal
I would love to find a cheap fix for it like adhesive. I checked tm website. I will cost over 200$ for the seal retainer and gasket. I found Tim Talluer (tst) and he said if I send him my retainer and 47$ he will fix it and send it back to me. It's worth that to not have to pull the cub a part again. Thanks for the ideas guys. Thanks Tim I'm mailing it to you today!!
Who is online
Users browsing this forum: No registered users and 32 guests