This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

49 cub with the Lift Disk

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Thu Mar 10, 2005 9:07 am

steveb05 wrote: The reason I have the master control is that is what the cub had on it when I purchased it. Anyone can have touch control it takes a real cub owner to keep it original. Steve
Image
If you are not part of the solution,
you are part of the problem!!!
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Not Mini Acres
10+ Years
10+ Years
Posts: 29
Joined: Fri Nov 12, 2004 11:14 pm

Steves Disc

Postby Not Mini Acres » Sun Mar 13, 2005 8:16 pm

I saw a picture of a disc like this and it had the draw bar reversed. Did they make several different versions of these lift disc? I have a fast hitch disc. so I'm not up on these, but, still love learning about Cubs and equipment from all of y'all.
Just was wondering! Thanks men!
Love my Cubs, a 1951 Regular and a 1957 LoBoy. Got most the impliments,missing a couple but still looking. Have a lot of Tractor Buddies and getting more!
Top
'Country' Elliott
Cub Pro
Cub Pro
Posts: 2575
Joined: Mon Feb 03, 2003 5:25 am
Zip Code: 37774
Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
1 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill
Circle of Safety: Y
Location: TN, Loudon (near Knoxville)

Postby 'Country' Elliott » Mon Mar 14, 2005 9:59 am

Steve...John is right about adjustin' the spring on your Master Control Lift :wink: . I have one on my 1948 Cub. The spring is a "helper spring" that must be adjusted for the implement you're lifting :D . Mine works just fine on liftin' my Model 22 sickle mower 8) ...but your disc will still require a lot of tightening up on your spring tension :wink: .
"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"
Top
User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont
Contact:
Contact George Willer

Postby George Willer » Mon Mar 14, 2005 10:41 am

Steve,

How much weight do you plan to add to the weight tray? :lol: :lol:

I realize you have the special drawbar, but if it were mounted in the front holes, still facing back, would the disk clear the tires? If so, it would help slightly because of the angle.
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
Top
User avatar
Steve Butram
Cub Pro
Cub Pro
Posts: 2459
Joined: Mon Feb 17, 2003 7:53 am
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub
Circle of Safety: Y
Location: IN West Lafayette

Postby Steve Butram » Mon Mar 14, 2005 11:03 pm

Country I adjusted the spring and it lifted easier. Although I was afraid to start turning the adjuster due to the age I went real slow and it adjusted fine .

George, At this time I'm waiting to see if I will need to add any weight.I adjusted the angle on of attack at this time I will have to wait until the ground thaws out. As for flipping the draw bar forward I don't beleive that the disk will fit wit the draw bar reversed. the disk has a slot on the tongue that will only fit to the drawbar in the present position I will post a pix tomorrow when I get back out to the shop.
Be prepared to be unprepared Seth Goden
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Mon Mar 14, 2005 11:08 pm

I think Geroge meant to move it to the front holes, but still leave the drawbar pointing to the rear, not reversing it.
If you are not part of the solution,
you are part of the problem!!!
Top
User avatar
Steve Butram
Cub Pro
Cub Pro
Posts: 2459
Joined: Mon Feb 17, 2003 7:53 am
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub
Circle of Safety: Y
Location: IN West Lafayette

Postby Steve Butram » Tue Mar 15, 2005 8:16 pm

I think Geroge meant to move it to the front holes, but still leave the drawbar pointing to the rear, not reversing it.


Yes John I understand what you are getting at but moving the drawbar forward But as you will be able to see in the following pix there is not enough tongue on the disk to allow me to do that. Image Steve
Be prepared to be unprepared Seth Goden
Top
gar
10+ Years
10+ Years
Posts: 4
Joined: Sat Aug 27, 2005 11:01 am

Farmall single lift disk

Postby gar » Sun Aug 28, 2005 10:21 am

Could you send a closer pic of the attachment for this disk. I have this type of disk and it is missing some of the drawbar mounts. Thanks. gar
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Aug 28, 2005 1:20 pm

gar, sent you an email.
If you are not part of the solution,
you are part of the problem!!!
Top
User avatar
Steve Butram
Cub Pro
Cub Pro
Posts: 2459
Joined: Mon Feb 17, 2003 7:53 am
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub
Circle of Safety: Y
Location: IN West Lafayette

Postby Steve Butram » Mon Aug 29, 2005 5:21 pm

Gar , What angle do you need and I will take some pix . Steve
Be prepared to be unprepared Seth Goden
Top
gar
10+ Years
10+ Years
Posts: 4
Joined: Sat Aug 27, 2005 11:01 am

Postby gar » Mon Aug 29, 2005 8:26 pm

steveb05 wrote:Gar , What angle do you need and I will take some pix . Steve
Need some closeups of the A-Frame that bolts to the draw bar. Thanks. gar
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 42 guests