This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Frt Wheel Brg
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Bamacub
- 10+ Years
- Posts: 136
- Joined: Sat Feb 15, 2003 9:23 am
- Location: Ashville Alabama
Frt Wheel Brg
Has anyone ordered the front wheel bearing kit from Carter & Gruenewald? If so does it have inner & outer brg & races plus seal & felt washer. One last ? is the kit caseIH.
-
Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
The kit is COMPLETE. Timken bearings and races (both) the felt washer and the CR seal are in the kit. Does not have a cotter pin though! Even has instructions.
It is from Case/IH and costs about $55.
It was far cheaper than just the seal cost from Kaman.
Go with the kit.
It is from Case/IH and costs about $55.
It was far cheaper than just the seal cost from Kaman.
Go with the kit.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Who is online
Users browsing this forum: taiterhead and 50 guests
