Farmall Cub

when i replace the radaitor gasket do i need any sealant on it , and also the rubber on the inside of my radiator cap is missing i cut about three picies of gasket material and put it in the cap is this ok or should i replace with a store bought one, and if so what kind do i use, thanks alot

Most people don't use any sealant, but I like to use a thin layer of silicone gasket compond on it, sometiems they are hard to sela, especially if the casting is bolwed a little from having been frozen. A homemade gasket for cap is ok, if you buy one get a non pressuerized one or at most a 3 pound one.

Just noticed it yesterday. But on the radiator cap the distance between the seal on the cap and the seal at the end is longer than a standard cap. So the cap sealed but the seal in the radiator never touched the bottom seal area. No wonder every time I got on the side of a hill antifreeze ran out the overflow tube. Got a new one from my IH dealer today for $12.50

Billy