Fuel line ferrule

[birddog]

Here's a picture of what I'm sure I used on our Cub when I replaced the previous owners rubber hose. I know I've used it on other similar looking carb and mixer inlets on some of our gas engines.

It's called a "Double Compression" fitting. I don't think it is available any more as it's not listed in the newer Weatherhead books. In one of the old books I have it's part Number is; 6100x5 for the 5/16 line. It's 1/2x20 thread.



If they are available or you can find old stock you can also get a male connector, if someone has done the all to familiar 1/8 pipe hose barb replacement. The number for the connector is; 6200x5.

[Joe Malinowski]

Bird dog, the guy who set me up has a old garage and has bins of fittings and that is just what we used.

[sammydonnacub]

Well Done Boss..........and Joe. Perfect example of why this forum is read at least 2 times a day by me... and MANY Others...Thanks Guys for another Job WELL Done...
Sammy

[Matt Kirsch]

The replacement fuel bowl I bought for my Cub from Tractor Supply had the "double compression" fitting on it. No ferrule.

Too bad I didn't come across this thread sooner. I knew what the problem was