I've seen a few of them before but never one this nice. Looks to be original paint....




Plow question and picture, numbers addedModerator: Team Cub
11 posts
• Page 1 of 1
Plow question and picture, numbers addedIs there a number/ code somewhere on this plow telling if it's for a Cub or a larger tractor ?
I've seen a few of them before but never one this nice. Looks to be original paint.... ![]() ![]() ![]() ![]() Last edited by Yogie on Mon Sep 24, 2012 10:02 pm, edited 1 time in total.
![]() Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote. Ben Franklin
Re: Plow question and pictureHi Yogie, yes there is a larger plow for the 140 type tractors, I believe the beam is a little bigger and the plow share, I have a F 11 for a cub,the upper parts are red and the lower parts blue
Tim
Re: Plow question and pictureMeasure the moldboard at the seam with the share. 12" Cub, 14", or 16" A or 140.
Best,
Mike Tractors are made to work! "A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Re: Plow question and picturethe one for a cub will have a 6 and 7 as the last digit in the beam number the one for a 140 will be a 8 and 9 as the last digit in the beam part number as in left and right beam
Re: Plow question and pictureit also looks like that one has the 4 special spacer blocks which are very hard to find which should be the same for both cub and 140 check the parts book
Re: Plow question and picture, numbers addedIn the curve of the right beam are these numbers IH 521498R1
Left side shows this IH 521497R1 ![]() Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote. Ben Franklin
Re: Plow question and picture, numbers added
Those numbers are for the larger 100/130/140 plow.
Re: Plow question and picture, numbers addedThe Case IH website lists those part numbers as the beams for the F11.
Re: Plow question and picture, numbers addedI have one of these plows. doesnt matter what the beam number is, they are the same for the cub and 140 and so on,what makes the difference is the plow it self. cub takes a 12" plow the 140 take a 14" plow. either plow will work on either tractor. my plow has a decal saying LF-1-11. with plow chief plows.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
Re: Plow question and picture, numbers addedAfter the first pass, the width of cut is determined by where you have the wheels set and where you drive in the furrow, not by the width of the plow bottom.
Even if it is too wide, it should still work for a cub as long as you don't take a full cut.
Re: Plow question and picture, numbers addedLooks just like mine, intersting post Yogie, interesting replies.
11 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: ericofmaine, Jim Becker, motoscott909, shyntempt and 4 guests |
|