Boss, now that we know the inexpensive chance of this $1.00 "o"ring working was already tried http://www.tmtractor.com/new/hy/396fp.htm
, I would agree with you, but now it'll cost quite abit more, especially finding someone who will sell just the good shaft alone and not wanting to sell the whole pump. He'll be also taking a chance on buying any used pump, unless it's taken apart by the seller and thoroughly inspected.
Rick
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Should drive gear shaft be smooth?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Should drive gear shaft be smooth?
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Should drive gear shaft be smooth?
Weren't the main pump parts fitted together in the first place? If so, any used shaft should be kept with the original pump. Besides, since that shaft is the only part that ever needs replacing, removing a good shaft from a used pump makes the rest of the pump junk. In other words, if you need to replace the shaft, look for a complete used pump.
-
- 10+ Years
- Posts: 23
- Joined: Wed Aug 08, 2012 3:18 pm
- Zip Code: 16033
- Tractors Owned: ;~)
1949 Cub
193 Moldboard Plow
Front Blade/Grader
2004 Kubota BX2230
Front Loader
60" Belly Mower - Circle of Safety: Y
- Location: Evans City, PA
Re: Should drive gear shaft be smooth?
I found a shaft at Burghs that was in much better shape than mine. He, of course, threw in the rest of the pump at no additional cost. The new (to me) shaft shows some wear marks, but no grooves. I think the pump had been setting on his bench for quite some time.
I only replaced the drive gear and put it in the pump that was on my tractor. Should have I used the pump that came with the drive gear since it had worn together with the other gear and bushings in that pump?
Fred
I only replaced the drive gear and put it in the pump that was on my tractor. Should have I used the pump that came with the drive gear since it had worn together with the other gear and bushings in that pump?
Fred
"Greasy" 1949 Cub Serial # 97132
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Should drive gear shaft be smooth?
Prefered method is to keep pump parts together. Exchanging the drive gear will probably won't effect the pump's operation.Cubota wrote:Should have I used the pump that came with the drive gear since it had worn together with the other gear and bushings in that pump?
I have an excuse. CRS.
-
- 10+ Years
- Posts: 339
- Joined: Wed Aug 15, 2012 8:00 am
- Zip Code: 31553
- Tractors Owned: 1966 Int'l Cub, C-2 mower 2005 Farm-Trac, 7ft Harrows and Box blade 1976 Int'l Cub, Woods 59 mower, Turn Plow, Full set of cultivators, Harrows, 174 Planter & Fertilizer unit 1953 Farmall Cub,full set of spring cultivators, wheel weights,
PTO belt pulley, snow plow and misc parts. - Circle of Safety: Y
- Location: S/E Georgia
Re: Should drive gear shaft be smooth?
I put a kit in my pump a couple of months ago. I had a slight grove in my shaft and I tried to polish it out as much as possible. So far its OK. However, if it does start to leak again, how much does a new or good used shaft cost. Thanks.
If you always do what you've always done -- you'll always get what you've always got!
-
- 10+ Years
- Posts: 23
- Joined: Wed Aug 08, 2012 3:18 pm
- Zip Code: 16033
- Tractors Owned: ;~)
1949 Cub
193 Moldboard Plow
Front Blade/Grader
2004 Kubota BX2230
Front Loader
60" Belly Mower - Circle of Safety: Y
- Location: Evans City, PA
Re: Should drive gear shaft be smooth?
The used drive gear cost me $40.00, which came with a free pump. The guy would not budge on the price. Not sure if I paid to much for it, but he had it and I was in need.
I had bought a used magneto coil cover the week before for $20.00 from the same guy, which was $10.00 less than what he told me on the phone. I thought it was a great deal since a new on is $50.00 and the one I bought was in great shape.
Fred
I had bought a used magneto coil cover the week before for $20.00 from the same guy, which was $10.00 less than what he told me on the phone. I thought it was a great deal since a new on is $50.00 and the one I bought was in great shape.
Fred
"Greasy" 1949 Cub Serial # 97132
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 154
-
by inairam
Tue Jun 06, 2023 8:17 am
-
- 10
- 454
-
by Crimson Tim
Sat Dec 11, 2021 12:29 am
-
-
throwout bearing yoke and drive shaft Attachment(s)
by pett3227b » Wed Apr 20, 2022 9:49 am » in Farmall Cub - 13
- 483
-
by Gary Dotson
Fri Apr 29, 2022 7:54 am
-
-
- 4
- 218
-
by 1978cub
Sat Dec 25, 2021 5:55 pm
-
-
Hydraulic Pump Drive Gear Washer Attachment(s)
by oldfarmkid » Mon Feb 28, 2022 6:45 pm » in Farmall Cub - 35
- 855
-
by oldfarmkid
Sun Mar 06, 2022 10:56 am
-
Who is online
Users browsing this forum: Don McCombs, Majestic-12 [Bot] and 12 guests