This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
drawbar bracket mount fix
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- frederick
- 10+ Years
- Posts: 132
- Joined: Wed Aug 11, 2010 12:19 am
- Zip Code: 95125
- Tractors Owned: 1951 cub hi-crop
- Circle of Safety: Y
- Location: san jose, california
- Contact:
drawbar bracket mount fix
can't find the original thread on this subject to add to, but in any event here is my solution to a broken or missing mounting boss on the inner rear gear housing.
forward most boss was broken off leaving only 3 or 4 threads deep inside, enough to catch a longer bolt but not enough shear for any serious work.I've fixed electrical problems with a hammer
-
- 10+ Years
- Posts: 1224
- Joined: Wed Jul 02, 2008 6:11 am
- Location: MN, Mankato
Re: drawbar bracket mount fix
Is most of the torque transfered to the top bolt?
Todd
Todd
Who is online
Users browsing this forum: radioguy41 and 44 guests